Sea buckthorn cultivars promising for mechanized harvesting by cutting fruit-bearing branches

Background. Sea buckthorn (Hippophae rhamnoides L.) is the main berry crop in the horticultural production of Altai Territory and occupies the largest growing area among berries in Russia. Meanwhile, further expansion of commercial plantations is limited by known bottlenecks in harvesting. In this context, new technological solutions in harvest mechanization are considered one of the primary tasks. A promising way is the cutting of fruit-bearing branches. At the same time, the development of cultivars suitable for such harvesting technique is very important.

Materials and methods. Thirteen cultivars and selected forms of sea buckthorn developed at the Federal Altai Scientific Center of Agro-Biotechnologies were taken as research material. To evaluate the productivity of top branches, three of them with a length of 70–100 cm were cut from the plants of each accession. Fruit detachment force was assessed using a Dina-2 device. Dispersion analysis was applied for statistical interpretation.

Results. Productivity of top branches as well as agronomic and biological characteristics of sea buckthorn fruits were studied. Accessions 87-93-1, 111-05-3 and 378-06-1 were identified for high productivity of their top branches and for predomination of the generative part over the vegetative one. The highest number of berries per bud (5.4–5.9 pieces) was observed in accessions 87-93-4, 32-01-1, 378-06-1 and 111-05-3. Cv. ‘Afina’ demonstrated for its high level of vegetative and generative productivity. Selected forms 111-05-3, 32-01-1 and 4-93-11 with low fruit detachment force (136.8–155.1 g) are promising for shaking without prior freezing.

Conclusion. Selected forms 111-05-3, 378-06-1 and 32-01-1 were recognized as most promising for harvesting by branch cutting.

1. Bartenev V.D., Habarov S.N. Sea buckthorn harvester: designing, manufacturing, engineering, trial experiments, and development of basic requirements (Kombayn dlya uborki oblepikhi: proyektirovaniye, izgotovleniye, issledovatelskiye ispytaniya i razrabotka iskhodnykh trebovaniy). Bulletin of Altai State Agricultural University. 2012;2(88):97-103. [in Russian]

2. Brūvelis A. Experiences about sea buckthorn cultivation and harvesting in Latvia. In: Kauppinen S., Petruneva E. (eds). Producing Sea Buckthorn of High Quality: Proceedings of the 3rd European Workshop on Sea buckthorn; October 14–16, 2014; Naantali, Finland. Helsinki: Natural Resources Institute Finland; 2015. p.36-42. Available from: https://jukuri.luke.fi/bitstream/handle/10024/486036/luke-luo-bio_31_2015.pdf?sequence=4 [accessed Mar. 15, 2022].

3. Chagnon R., Boutin J., Fortin S. Development of a branch shaker to harvest seabuckthorn. In: D.B. McKenzie (ed.). Proceedings of the 3rd International Seabuckthorn Association Conference; August 12–16, 2007; Quebec City, Canada. Quebec City: INAF; 2009. p.31-38. Available from: https://www.researchgate.net/profile/Haihong-Wang-9/publication/303987959_Proceedings_of_the_3rd_International_Seabuckthorn_Association_Conference/links/57618b5f08aeeada5bc4fd87/Proceedings-of-the-3rd-International-Seabuckthorn-Association-Conference.pdf [accessed Mar. 15, 2022].

4. Dospekhov B.A. Methodology of field trial (Metodika polevogo opyta). Moscow: Agropromizdat; 1985. [in Russian]

5. Fu L., Peng J., Nan Q., He D., Yang Y., Cui Y. Simulation of vibration harvesting mechanism for sea buckthorn. Engineering in Agriculture, Environment and Food. 2016;9(1):101-108. DOI: 10.1016/j.eaef.2015.08.003

6. Fu L., Su H., Li R., Cui Y. Harvesting technologies for sea buckthorn fruit. Engineering in Agriculture, Environment and Food. 2014;7(2):64-69. DOI: 10.1016/j.eaef.2013.10.002

7. Habarov S.N., Kanarsky A.A. Sea buckthorn cultivation technology and mechanical harvesting improvement in the south of Western Siberia. Achievements of Science and Technology of AIC. 2013;(7):48-49. [in Russian]

8. Höhne F. Overview of cultivation technologies and their challenges. In: Kauppinen S., Petruneva E. (eds). Producing Sea Buckthorn of High Quality: Proceedings of the 3rd European Workshop on Sea buckthorn; October 14–16, 2014; Naantali, Finland. Helsinki: Natural Resources Institute Finland; 2015. p.36-42. Available from: https://jukuri.luke.fi/bitstream/handle/10024/486036/luke-luobio_31_2015.pdf?sequence=4 [accessed Mar. 15, 2022].

9. Khabarov S.N., Kanarskii A.A. Mechanical harvesting of seabuckthorn as the basis of commercial horticulture in the south of Western Siberia. Achievements of Science and Technology of AIC. 2016;30(11):63-65. [in Russian]

10. Koziy I. Statistics of berry production in Russia (Proizvodstvo yagod v Rossii v tsifrakh). Yagody Rossii = Berries of Russia. 2020;(1):3-4. [in Russian]

11. Levin A.M., Bartenev V.D., Mihailova N.V., Polyakov L.I. Trials results of combine “Joonas-2000” (Finland) at sea-buckthorn harvesting. Achievements of Science and Technology of AIC. 2009;(7):58-59. [in Russian]

12. Makarychev S.V., Kanarskiy A.A. The effectiveness of new methods of sea buckthorn plant formation for combine harvesting. Bulletin of Altai State Agricultural University. 2019;9(179):66-71. [in Russian]

13. Mann D.D., Petkau D.S., Crowe T.G., Schroeder W.R. Removal of sea buckthorn (Hippophae rhamnoides L.) berries by shaking. Canadian Biosystems Engineering. 2001;43:2.23-2.28.

14. Olander S. A review of berry harvest machine development in Sweden. Acta Horticulturae. 2012;965:171-178. DOI: 10.17660/actahortic.2012.965.22

15. Univer T., Tiirmaa K., Univer N., Kruuv H. The results of harvesting the berries of common seabuckthorn in Estonia. In: Yu. Zubarev, D. Eagle, J.T. Morsel (eds). Seabuckthorn. Research for a Promising Crop: A Look at Recent Developments in Cultivation, Breeding, Technology, Health and Environment. Berlin: BoD; 2014. p.91-100. Available from: https://www.oblepiha22.ru/assets/univer-the-results_of_harvesting_the_berries.pdf [accessed Mar. 15, 2022].